A quiet yet rugged garment designed for comfort and durability. The Outer Shell is a tough Four Ply Tussor Taslan Nylon. The underside of the shell fabric is coated to make it Waterproof Breathable ensuring the wearer is kept warm and dry during inclement weather.

To give you added protection, the inner lining is also Waterproof Breathable. The highest performance waterproof-breathable membrane is laminated to the underside. Pit zippers are provided so emblems can be sewn on without perforating the membrane.

FEATURES:

• Waterproof Breathable outer shell and lining.
• Factory sealed seams (taped).
• Removable 3M Thinsulate liner with unique pit construction for freedom of movement.
• Bi-swing back outer shell.
• Two piece sleeves.
• 10" side zipper vents with snap tab closures for easy access to equipment.
• Fleece lined hand warmer pockets.
• Epaulets with velcro closure for easy access to buttons.
• Double Storm Flap.
• Optional seal quality pile collar with button attachment.
• Pit zippers allow access for emblem attachment.
• Badge Tab.
• Large inside zippered pockets.
• 27 1/2" jacket length.
• Top and side entry flap pockets with reversed pleats.
• Adjustable sleeve cuffs with velcro closure.

Available Colors: Navy and Black

Available Sizes: Small Through 5XL

Duty Jacket Sizing Chart

Duty Jacket - Futher Specifications

Waist length duty jacket, 27-1/2" length on medium regular. YKK zipper double storm flap front; Bi-swing back in shell; permanent collar with removable pile collar (optional); badge tab; epaulets; two lower two-way patch pockets with reversed pleats and snap down flaps. Large inside zippered pocket; 9-1/2" YKK zippered side vents with snap-tab closure; Pit zippers for access to shell; 2-1/2" elasticized waistband; 2 piece sleeves with sleeve tabs. Removable zip-out quilted liner.

Duty Jacket Fabric

OUTER JACKET:

• Shell = 100% Nylon
• Weave = 4 Ply Tussor Taslan
• Coating = Waterproof PU 600MM Clear coated. Plain Dyed with waterproof coated.
• Lining = 100% Polyester. Waterproof 10,000MM; Breathable (6000 GM/24 hrs/M²) Milky lamination
• Weave = 100% Polyester Pumgee
• Denier = 75D/72FX75D/72F/122X90

ZIP-OUT REMOVABLE LINER:

• Shell = 100% Nylon
• Weave = 210T Taffeta
• Denier = 114 x 96/70D x 70D
• Lining = 100% Nylon plain Dyed Cire
• Piping = 100% Nylon
• Knit Cuffs = 1x1 12 Gauge Nylon

Duty Jacket Front

There shall be a #8, 23-1/2" black Vislon zipper front on medium regular size. This shall start from the bottom of the jacket and zip to the neck.

Duty Jacket Badge TAB

There shall be a badge tab affixed to the left breast 5-3/8" above the flap. There shall be two small metal eyelets spaced 1-3/4" apart.

Duty Jacket Badge Pockets

There shall be two lower two-way patch pockets, with reversed pleats and snap down flaps. The side entry hand warmer pockets shall be fleece lined. The flaps shall measure 6-7/8" wide, 2-5/8" high at the center point. The pockets shall measure 6-3/4" wide and 7-5/8" high. The flaps and pockets shall have a 1/4" topstitch all the way around.

Duty Jacket Collar

There shall be a permanent collar made of shell goods. An optional removable pile collar made with shell goods. The optional collar shall have 5 buttons on the inner side and 5 buttons on the outer side for jacket attachment.

Duty Jacket Sleeves

There shall be a snap on each cuff inside, 4" from the inside edge of sleeve cuff, to hold removable liner sleeve in place. There shall be adjustable cuffs with a Velcro closure.

Duty Jacket Epaulets

There shall be epaulets set into the shoulder seam. These shall measure approximately 2-1/8" wide. They shall finish at a point about 1/4" from the neck seam. There shall be a Black button with a matte finish and Velcro closure at the end with a buttonhole.

Duty Jacket Side Vents

There shall be YKK zippered side vents. There will be a 9-1/2" black nylon coil zipper set into the side seam beginning at the hem. There shall be a 3-3/4" snap tab closure from bottom of jacket.

Duty Jacket Removable Liner

There shall be a zip-out 3M Thinsulate ® removable liner, 200 gm 3M Thinsulate ® body, 100 gm 3M Thinsulate ® sleeves.

Sewing / Seams

The shoulder seam, armhole, sleeve outseam, and all other joining seams shall be single needle. All inside seams shall be taped.

THREAD:
Must be 3-ply, #40 poly-core, vat dyed to match shell.

Duty Jacket Interlining

The collar, front facings and pocket welts shall be interlined with a non-woven material.

Duty Jacket Label

EACH GARMENT WILL CARRY THE FOLLWING: MANUFACTURER'S NAME, "WPL" OR "RN" NUMBER AS REQUIRED BY THE FEDERAL TRADE COMMISSION, FABRIC CONTENTS, SIZE AND COMPLETE LAUNDERING INSTRUCTIONS. LABELS WILL BE PERMANENT TO WITHSTAND REPEATED CLEANINGS FOR THE LIFE OF THE GARMENT.

Finishing

ALL GARMENTS SHALL BE FINISHED IN A FIRST CLASS WORKMANLIKE MANNER WITH ALL LOOSE THREADS REMOVED. THE OMISSION OR APPARENT OMISSION OF ANY WORDING OR SPECIFICATIONS SHALL MEAN THAT ONLY THE HIGHEST QUALITY INDUSTRY STANDARDS SHALL BE USED ON ALL FABRIC AND COMPONENT PARTS INCLUDING LABOR.