Loading... Please wait...

Police Parka Duty Jacket MX02

Police Parka Duty Jacket MX02

$85.00
RRP: $130.00 (You save $45.00)
SKU
MX02
Brand
Weight
4.00 LBS
Shipping
Calculated at checkout
Quantity

Product Description

A ¾ length Police Parka with a 3-Ply Supplex® Nylon outer shell. The underside of the outer shell is waterproof-breathable, keeping the wearer warm and dry during inclement weather.

FEATURES:

  • Waterproof -Breathable outer shell.
  • Factory sealed seams (taped).
  • Removable 3M Thinsulate liner with unique.
  • Pit construction for freedom of movement.
  • Two piece sleeves.
  • 10" side zipper vents with snap tab closures for easy access to equipment.
  • Fleece lined hand warmer pockets.
  • Epaulets with velcro closure for easy access to buttons.
  • YKK Zipper Front.
  • Optional seal quality pile collar with button attachment.
  • Badge Tab.
  • Large inside zippered pockets.
  • 27 1/2" jacket length.
  • Top and side entry flap pockets with reversed pleats.
  • Adjustable sleeve cuffs with velcro closure.

Available Colors: Navy Only

Available Sizes: Small Through 5XL

Police Parka Duty Jacket Specifications

Police Parka Duty Jacket Specifications

Police Parka Duty Jacket Sizing Chart

Small to 5xl (Inches)
MX02SMLXL2XL3XL4XL5XL
Chest 48 52 56 60 64 68 72 76
Back Length (C.B.) 29 29 1/2 30 30 1/2 31 31 1/2 32 32 1/2
Sweep Relaxed 46 50 54 58 62 66 70 74
Sleeve Length (C.B.) 35 36 37 38 39 40 41 42
Cuff 14 1/2 14 3/4 15 15 1/4 15 1/2 15 3/4 16 16 1/4
Collar Opening 19 19 1/2 20 20 1/2 21 21 1/2 22 22 1/2
Back Collar Height 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4

Police Parka Duty Jacket Specifications

Coat style, 29 ½" length on size medium regular, YKK zipper front, button-removable pile collar, badge tab, epaulets, two upper flap pockets with metal buttons, two set in welt pockets, zippered side vents, removable zip-out quilted liner.

OUTER JACKET:

  • Shell = 100% Nylon
  • Weave = 3 Ply Supplex ®/li>
  • Coating = Waterproof (PU 3000MM); Breathable (MVP 3000 GM/24 hrs/M²
  • Lining = 100% Nylon, Plain Dyed Cire.
  • Weave = 210T Taffeta
  • Denier = 114 x 96/70D x 70D

ZIP-OUT REMOVABLE LINER:

  • Shell = 100% Nylon, Plain Dyed Cire.
  • Weave = 210T Taffeta, Plain Dyed Cire
  • Denier =114 x 96/70D x 70D
  • Lining = 100% Polyester Mesh
  • Piping = 100% Nylon
  • Knit Cuffs = 1x1 12 Gauge Nylon Rib

Duty Jacket Front

There shall be a #8, 23-1/2" black Vislon zipper front on medium regular size. This shall start from the bottom of the jacket and zip to the neck.

Duty Jacket Badge TAB

There shall be a badge tab affixed to the left breast ¾" above the flap. There shall be 2 small metal eyelets spaced 1 ¼" apart.

Duty Jacket Badge Pockets

There shall be two upper flap pockets. These shall have a slight scallop. They shall measure 5-1/2" wide, 2-1/8" high at the sides and 2-5/8" high at the center point. There shall be a metal "P" button closure. The flap shall have a ¼" topstitch.

There shall be two lower set in welt pockets. The welt shall be 7" long and 1" wide. There shall be bar tacks at the ends of the welts.

Duty Jacket Collar

There shall be 8 buttons removable 100% Acrylic micro pile collar of 35 oz. seal skin quality. The under collar shall be of shell goods, with a non-woven interlining.

Duty Jacket Sleeves

Shall be one piece, set in style. There shall be 1/8" vinyl piping at sleeve cuffs.

Duty Jacket Epaulets

There shall be epaulets set into the shoulder seam. These shall measure approximately 2" wide. They shall finish at a point about 1½" from the neck seam. There shall be a 24 ligne metal "P" button at the end with a buttonhole.

Duty Jacket Side Vents

There shall be YKK zippered side vents. There will be a #5 nylon coil zipper set into the side seam beginning at the hem.

Duty Jacket Removable Liner

There shall be a zip-out Thinsulate ® removable liner, 200 gm 3M Thinsulate ® body, 100 gm 3M Thinsulate ® sleeves.

Sewing / Seams

The shoulder seam, armhole, sleeve out seam, and all other joining seams shall be single needle.

THREAD:
Must be 3-ply, #40 poly-core, vat dyed to black.

Duty Jacket Interlining

The collar, front facings and pocket welts shall be interlined with a non-woven material.

Police Parka Duty Jacket Label

EACH GARMENT WILL CARRY THE FOLLWING: MANUFACTURER'S NAME, "WPL" OR "RN" NUMBER AS REQUIRED BY THE FEDERAL TRADE COMMISSION, FABRIC CONTENTS, SIZE AND COMPLETE LAUNDERING INSTRUCTIONS. LABELS WILL BE PERMANENT TO WITHSTAND REPEATED CLEANINGS FOR THE LIFE OF THE GARMENT.

Finishing

ALL GARMENTS SHALL BE FINISHED IN A FIRST CLASS WORKMANLIKE MANNER WITH ALL LOOSE THREADS REMOVED. THE OMISSION OR APPARENT OMISSION OF ANY WORDING OR SPECIFICATIONS SHALL MEAN THAT ONLY THE HIGHEST QUALITY INDUSTRY STANDARDS SHALL BE USED ON ALL FABRIC AND COMPONENT PARTS INCLUDING LABOR.

Find Similar Products by Category

Vendors Other Products

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

Sign up to our newsletter

Share with us

Facebook
PayPal Logo
Online Payment Service

Click the button below to add the Police Parka Duty Jacket MX02 to your wish list.