An all-season windbreaker, with all the options. Removable zip-out liner, removable optional fur collar, weapons access and more! The outer shell is a 3-Ply Oxford Nylon.

FEATURES:

• Waterproof outer shell.
• PWL1 Removable 3M Thinsulate liner sold separately with unique pit construction for freedom of movement.
• Two piece sleeves.
• 10" side zipper vents with snap tab closures for easy access to equipment.
• Fleece lined hand warmer pockets.
• Epaulets with velcro closure for easy access to buttons.
• YKK Zipper front.
• Optional seal quality pile collar with button attachment.
• Badge Tab.
• Large inside zippered pockets.
• 27 1/2" jacket length.
• Top and side entry flap pockets with reversed pleats.
• Adjustable sleeve cuffs with velcro closure.

Available Colors: Navy, Black and Brown.

Available Sizes: Small Through 5XL

Police Windbreaker Specifications

Police Windbreaker Duty Jacket Sizing Chart

Police Windbreaker - Futher Specifications

Waist length jacket, 26" length on medium regular. YKK zipper front; permanent collar with removable pile collar (optional); epaulets with Velcro closure; two upper mitered patch pockets with pleats and velcro down flaps; two lower slash hand warmer pockets; Inside zippered pocket. 10" YKK zippered side vents with snap-tab closure. 2-1/2" elasticized waistband. 2 piece sleeves with sleeve tabs. Removable zip-out quilted liner.

Police Windbreaker Jacket Fabric

OUTER JACKET:

• Shell = 100% Nylon
• Weave = 3 Ply Oxford
• Coating = Waterproof (PU 600 MM).
• Lining = 100% Nylon
• Weave = 100% Polyester Pumgee
• Denier = 200Dx200D/60x58

ZIP-OUT REMOVABLE LINER:

• Shell = 100% Nylon
• Weave = 210T Taffeta
• Denier = 114 x 96/70D x 70D
• Lining = 100% Nylon
• Coating - Acrylic 500mm clear coated, waterproof.
• Piping = 100% Nylon

Police Windbreaker Front

There shall be a #5, 22" black metal zipper front on medium regular size. This shall start from the bottom of the jacket and zip to the neck.

Police Windbreaker Badge TAB

There shall be a badge tab affixed to the left breast 3/4" above the flap. There shall be two small metal eyelets spaced 1-1/2" apart.

Police Windbreaker Badge Pockets

There shall be two upper mitered flap pockets with pleats and metal "P" buttons. There shall be two lower fleece lined, hand warmer slash pockets.

Police Windbreaker Collar

There shall be a permanent collar made of shell goods. An optional removable pile collar FUPW made with shell goods is available. The optional collar shall have 5 buttons on the inner side and 5 buttons on the outer side for jacket attachment.

Police Windbreaker Sleeves

There shall be a snap tab on each cuff inside, 2" from the inside edge of sleeve cuff, to hold removable liner sleeve in place. There shall be adjustable cuffs with Velcro closure.

Police Windbreaker Epaulets

There shall be cross-stitched epaulets. These shall measure approximately 2" wide. They shall finish at a point about 1" from the neck seam. There shall be a 24 ligne metal "P" button at the end with a buttonhole and Velcro closure.

Police Windbreaker Side Vents

There shall be YKK zippered side vents. There will be a 10" black nylon coil zipper set into the side seam beginning at the hem. There shall be a 1" snap tab closure from bottom of jacket.

Police Windbreaker Removable Liner

There shall be a zip-out 3M Thinsulate ® removable liner, 200 gm 3M Thinsulate ® body, 100 gm 3M Thinsulate ® sleeves.

Sewing / Seams

The shoulder seam, armhole, sleeve out seam, and all other joining seams shall be single needle.

THREAD:
Must be 3-ply, #40 poly-core, vat dyed to match shell.

Interlining

The collar, front facings and pocket welts shall be interlined with a non-woven material.

Duty Jacket Label

EACH GARMENT WILL CARRY THE FOLLWING: MANUFACTURER'S NAME, "WPL" OR "RN" NUMBER AS REQUIRED BY THE FEDERAL TRADE COMMISSION, FABRIC CONTENTS, SIZE AND COMPLETE LAUNDERING INSTRUCTIONS. LABELS WILL BE PERMANENT TO WITHSTAND REPEATED CLEANINGS FOR THE LIFE OF THE GARMENT.

Finishing

ALL GARMENTS SHALL BE FINISHED IN A FIRST CLASS WORKMANLIKE MANNER WITH ALL LOOSE THREADS REMOVED. THE OMISSION OR APPARENT OMISSION OF ANY WORDING OR SPECIFICATIONS SHALL MEAN THAT ONLY THE HIGHEST QUALITY INDUSTRY STANDARDS SHALL BE USED ON ALL FABRIC AND COMPONENT PARTS INCLUDING LABOR.