A Thigh Length Police Raincoat reversible to Orange/Black. Clear coated Oxford Nylon. High water proof standard - Water proof to 3000mm. Factory sealed seams (taped). 2 inch 3M Silver reflective striping on sleeves shoulder, chest and waist.

Available Sizes: Small through 5XL

Rain Jacket - Futher Specifications

Coat style rain jacket, YKK zipper front with storm flap, two storm flap front pockets with snaps, attached hood, elastic cuffs, drawstring in bottom hem, 1" reflective silver striping (on Lime Green only).

Rain Jacket Fabric

OUTER JACKET:

• Shell = 100% Nylon, waterproof-breathable, milky coating for smooth finish. Full Dull Yarn.
• Lining = 1100% Nylon, 210T Taffeta, Plain Dyed Cire.

Rain Jacket Front

There shall be a YKK zipper front with storm flap made of shell goods. Drawstring in bottom hem. 1" Horizontal reflective silver striping across chest and around sleeves at elbow height (for Lime Green only).

Rain Jacket Badge Pockets

There shall be two diagonal storm flap front pockets with 2 button snap closure, made of shell goods.

onal collar shall have 5 buttons on the inner side and 5 buttons on the outer side for jacket attachment.

Rain Jacket Sleeves

There shall be elastic sleeve cuffs made of shell goods.

Sewing / Seams

The shoulder seam, armhole, sleeve out seam, and all other joining seams shall be single needle.

THREAD:
Must be 3-ply, #40 poly-core, vat dyed to match shell.

Interlining

The hood, front facings and pocket welts shall be interlined with a non-woven material.

Duty Jacket Label

EACH GARMENT WILL CARRY THE FOLLWING: MANUFACTURER'S NAME, "WPL" OR "RN" NUMBER AS REQUIRED BY THE FEDERAL TRADE COMMISSION, FABRIC CONTENTS, SIZE AND COMPLETE LAUNDERING INSTRUCTIONS. LABELS WILL BE PERMANENT TO WITHSTAND REPEATED CLEANINGS FOR THE LIFE OF THE GARMENT.

Finishing

ALL GARMENTS SHALL BE FINISHED IN A FIRST CLASS WORKMANLIKE MANNER WITH ALL LOOSE THREADS REMOVED. THE OMISSION OR APPARENT OMISSION OF ANY WORDING OR SPECIFICATIONS SHALL MEAN THAT ONLY THE HIGHEST QUALITY INDUSTRY STANDARDS SHALL BE USED ON ALL FABRIC AND COMPONENT PARTS INCLUDING LABOR.